FE-180A Marine Epoxy Maximum Bond Strength
- Maximum bond strength between teak and marine substrates
- Flexible strength resists shock and twists
- Mixes in 1:1 ratio, color is brown
FE-180A Marine Epoxy is formulated to achieve outstanding bond strength to most common marine materials including teak, other woods, fiberglass, aluminum and steel. The specially-engineered fillers allow the FE-180A to display superior wet-out of the bonding surfaces resulting in both a mechanical and chemical bond to adhere to even the most challenging substrates.
Once thoroughly mixed, the material can be spread immediately, requiring no induction time. At 77°F (25°C), a layer of FE-180A applied with a 3/16″ (4.8mm) toothed trowel will have an open time of approximately 120-130 minutes, the material will set in approximately 6-8 hours, and complete cure will be achieved in approximately 24-36 hours.
Once cured, FE-180A Marine Epoxy provides excellent water-resistance, flexibility and internal strength which ensures the long-term stability of the composite structure. FE-180A Fitting Epoxy will cure in temperatures as low as 50ºF (10ºC). Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed.
This bonding epoxy has US Department of Transportation “non-corrosive” classification so it does not require hazardous labeling for shipment.
COVERAGE: Approximately 30 ft²/Gal (2.8m²/3.78L)